Sign In >>


HOT LINKS
TRACE MODE Video


CASE STUDIES
TRACE MODE SCADA HMI
SCADA HMI SOFTLOGIC MES EAM HRM

AdAstrA Cuts Prices for Adaptive Pid Loops And Hot Redundancy

AdAstrA announces the dramatic prices reduction for the two hi-tech TRACE MODE units with the automatic Hot redundancy (Double Force RTM) and the Adaptive PID Loops tuning (Adaptive control RTM) support. Earlier the Double Force RTM existed only in the 64000x16 I/O's version, but since TRACE MODE 5.11 release, there will be the splitting to 128-512-1024-32000x16 I/O's. Due to more flexible price policy AdAstra plans to increase sales of Double Force RTM for those system integrators who develop small scale, but critical control systems with hot redundancy. First of all the new products are focused to the petroleum, gas, electric power and chemistry industries.

The advantage of TRACE MODE is that the development of hot redundant systems is completely automated. The user just need to indicate, that the PC or SoftPLC must have a redundant node, and the system will build and fill in the appropriate database (channels base) automatically. In case of any component modification, TRACE MODE 5 updates the redundant nodes automatically. In real time the built-in hot redundancy system controls the nodes operation and in case of failure, it switches the information flows to the redundant device automatically, automatically synchronizing also the of the process logs.

TRACE MODE provides the following hot redundancy features:

  • automatic sensor signal circuit redundancy;
  • automatic I/O card redundancy;
  • automatic network operability monitoring and switching to redundant lines;
  • automatic RS232/485 bus operability monitoring and switching to redundant bus;
  • automatic switching to RS232/485 if network communication fails;
  • automatic hot redundancy for servers (master/slave) with switching by timeout or by any other user defined criterion;
  • shock-free system restart using dump;
  • automatic redundancy of archive trends and mnemonic schemes;
  • automatic hot redundancy of user's calculation algorithms (FBD programs);
  • automatic synchronization of archives stored on main and redundant servers;

On the TRACE MODE redundant servers the operator can work with various screens and trends independently. The prices for Adaptive control RTM are reduced to $ 500. TRACE MODE 5.11 will be available after 25.09.2002. You can obtain the free of charge development system here.

TOP NEWS

The New TRACE MODE SCADA/HMI Release 6.10.2 Available For Download

TRACE MODE SCADA/HMI

AdAstra Research Group, Ltd (Moscow, Russia) has announced a new release of integrated SCADA- and SOFTLOGIC- system TRACE MODE 6.10.2.

The release is now available for all registered users of TRACE MODE 6 SCADA/HMI for free (it is free for download  from the  User's Personal Account).

In accordance to increased security requirements of unauthorized access and user authentification in the process control software, new means of user rights management have been introduced. In the 6.10.2 some new features added, bugs detected fixed.

The new release 6.10.2 offers new software products and some improved features ......

TRACE MODE SCADA/HMI Controls Kudankulam Nuclear Power Plant Fire Safety System

SKB Tensor company (Russia, Moscow region) has developed and successfully commissioned an automated fire safety system for units №1 and №2 of Kudankulam Nuclear Power Plant, India (Tamil Nadu).

The automated fire safety system for units №1 and №2 of Kudankulam nuclear power plant, India runs under control of TRACE MODE SCADA/HMI (AdAstrA, Russia).

TRACE MODE SCADA/HMI performs the following functions ...

 

DPTA Corp is TRACE MODE SCADA/HMI Software Dealer In Ho Chi Minh City (Viet Nam)

DPTA TRACE MODE SCADAThe Ho Chi Minh City based (Viet NamDuc Phong Technology and Automation Corporation (DPTA) has the status of AdAstrA Authorized Dealer. The corporatin has the experience and qualifications to sales and customer support for TRACE MODE SCADA/HMI software.

Viet Nam FlagTECHNOLOGY CORPORATION AND GERMAN STYLE AUTO was established in 2006, with a team of professionals, engineers, management staff are formally trained, motivated and experienced customers always trust.

TRACE MODE SCADA/HMI Controls Ventilation in a Riga Commercial and Office Center

TRACE MODE SCADA/HMI in climate control of the shoping center RD Holding, Riga, LatviaA Riga city based Sia Rameda company (Riga , Latvia) has used russian made TRACE MODE SCADA/HMI software to develop a control system for ventilation, heating and cooling equipment in the RD Holding commercial and office center in Riga (street Maskavas 240, Riga , Latvia).

The main purpose of the work is to connect all ventilation machines, chillers and heating units to a centralized computer, supervisory control system to ensure round the clock equipment monitoring from a single center.

The Sia Rameda engineers have replaced an old ....

Training Video: Connecting Mitsubishi FX3U PLC to TRACE MODE SCADA/HMI via Melsec Protocol

Melsec FX3U and SCADA/HMI TRACE MODELearn how to connect a Mitsubishi Melsec FX3U PLC to TRACE MODE SCADA/HMI through built-in driver with our new free online video training.

To run the film just ....

 

SCADA TRACE MODE In Process Control of The Biggest European Oil Shale Chemical Company

VKG OIL

Viru RMT Ou (Estonia, EU), Authorized System Integrator of AdAstrA Research Group fulfilled reconstruction of control system for the 1000 tones gas generator retort at the main technological process of VKG oil shale company.

VKG Oil is the biggest oil shale chemical industry in Europe, the main field of activity of which is thermal processing of oil shale. 1.4 million tons oil shale is reprocessed per year. The company produces various fuel oils, which are characterized by low viscosity and a setting point below -25ºC, oil coke and pitch, summary oil shale phenols, antiseptic wood impregnation oil and bitumen.

The return of investment in reconstruction of SCADA TRACE MODE based gas generator control system was achieved within...

LAST NEWS

Teknofeed Uses TRACE MODE HMI in Fodder Additives Plant Batching Control

A Belgorod based AIT company (South of Russia) has successfully used TRACE MODE SCADA/HMI software to develop and to implement a batch control system for manufacturing of fodder additives. The control system has been installed in facility of TeknoFeed (Tshebekino, Belgorod area, Russia).

The main task of the TeknoFeed control system consists in the most precise batch dosing of fodder additives. The control system maximizes batch dosing accuracy of loose and liquid components (acids) according recipes. 

The TeknoFeed batch control system includes ...

TRACE MODE SCADA/HMI In Control of The Biogas Fuel Production Plant in Poland

The Test company (Poland) used the TRACE MODE SCADA/HMI software to build the control system for the plant of biogas fuel production from the sewerage - Elbląskie Przedsiębiorstwo Wodociągów i Kanalizacji w Elblągu Sp. z o.o., situated in Elblag city in north-eastern Poland.

The Elblag city is a Polish leader in energy production from renewable sources, including biogas and biomass.

According to the developers of biofuel production systems, the use of SCADA TRACE MODE has reduced the overall cost of the project in two-three times (compared to the same level SCADA software). 

The system monitors the following values ...

Adastra Releases TRACE MODE 6 RTM for Linux

RTM TRACE MODE 6 for LinuxAdAstra Company (Russia) announced the release of real-time monitor (LinRTM) for the operating system Linux.

TRACE MODE RTM is the main runtime module of the integrated TRACE MODE 6 SCADA/HMI software, designed to operate on operator workstations.

The new LinRTM provides ...

The Brodsky Refinery (Bosnia) Implements TRACE MODE SCADA/HMI for EURO 5 Gasoline Production

Brod Refinery automated with TRACE MODE SCADA/HMIIn Bosnia, the Bosanski Brod refinery launched a second production line, which was repaired by the Russian company Zarubezhneft. Now the plant is able to produce the gasoline conforming to the Euro 5 standard.

The operator control systems for the gasoline production at the Bosanski Brod refinery were developped and implemented by several Russian system integrators. All integrators used Russian SCADA-software TRACE MODE 6 (AdAstra Research Group, Moscow) for process control of gasoline production.

New Brodsky refinery control system consists of the following parts ...

A New Free Driver for OMRON Sysmac PLC

omron plcAdAstra Research Group (Moscow, Russia) has released a new version of the free TRACE MODE SCADA/HMI driver for the OMRON programmable logical controller. The new driver is built in the TRACE MODE SCADA/HMI 6.09 release and above.

video tutorial demonstrating the technology of OMRON PLCs connecting over the network via UDP using the free built-in driver, is available.OMRON Logo

The new driver is much faster, easier and more functional than the previous ones. The new TRACE MODE OMRON PLC driver has the following important features...

TRACE MODE 6 SCADA/HMI In Control Of City Water Supply Utilities

The Iron–Technik company (Ust -Kamenogorsk, Kazakhstan), an AdAstra authorized system integrator, has launched into commercial operation an automation system for municipal public utility named "Oskemen" (Ust -Kamenogorsk, Kazakhstan ).

The new control system is build with TRACE MODE SCADA/HMI software and embraces 14 plants of the "Oskemen water utility" enterprise, e.g...

SCADA HMI TRACE MODE 6

Current TRACE MODE release 6.10.2. Upgrade now for free!



NEWS