Sign In >>


CASE STUDIES
TRACE MODE SCADA HMI
SCADA HMI SOFTLOGIC MES EAM HRM

TRACE MODE SCADA/HMI In Control of The Biogas Fuel Production Plant in Poland

Test ElblagThe Test company (Poland) used the TRACE MODE SCADA/HMI software to build the control system for the plant of biogas fuel production from the sewerage - Elbląskie Przedsiębiorstwo Wodociągów i Kanalizacji w Elblągu Sp. z o.o., situated in Elblag city in north-eastern Poland.

The Elblag city is a Polish leader in energy production from renewable sources, including biogas and biomass.

The biogas (methane) produced in Elblag water supply and sewage plant is used for the following purposes:

  • TRACE MODE SCADA/HMI logohouse heating;
  • as a heat source for industrial processes (heating of industrial facilities);
  • for electricity production.

Local energy companies are willing to buy biofuels from a variety of manufacturers, including even private households. The Elbląskie Przedsiębiorstwo Wodociągów i Kanalizacji w Elblągu Sp. z o.o. is among suppliers of environmentally friendly biofuels. 

Recycling waste for biogas production is performed in a special sealed container. Raw materials are mixed with other components, such as dried grass, sawdust and organic waste. The mixture was vigorously stirred using special equipment. The decomposition of organic substances as a result of airless fermentation caused by the vital activity of anaerobic bacteria, a mixture of gases. A significant portion of the mixture of methane (60%), except that produces carbon dioxide (35%) and some other chemical compounds. The waste organics are used in the enterprise as fertilizer.

The Test Company is an Adastra authorized system integrator in Poland.

Hardware level of biofuel production control system is done with the GE Intelligent Platforms industrial controllers and Astraada HMI panels.

At the supervisory level, the new biofuel production control system uses TRACE MODE 6 SCADA/HMI software. The control system monitors the following values:

  • materials loading;
  • pressure;
  • gas leakage;
  • temperature in the vessel.

New biofuel production control system runs  the TRACE MODE SCADA/HMI DocRTM+, which provides advanced data acquisition and logging, data visualization on HMI and on trends and to generate the required reporting documents.

According to the developers of biofuel production control systems, the use of SCADA TRACE MODE has reduced the overall cost of the project in two-three times (compared to the same level SCADA software). 

TOP NEWS

TRACE MODE SCADA/HMI Controls Kudankulam Nuclear Power Plant Fire Safety System

SKB Tensor company (Russia, Moscow region) has developed and successfully commissioned an automated fire safety system for units №1 and №2 of Kudankulam Nuclear Power Plant, India (Tamil Nadu).

The automated fire safety system for units №1 and №2 of Kudankulam nuclear power plant, India runs under control of TRACE MODE SCADA/HMI (AdAstrA, Russia).

TRACE MODE SCADA/HMI performs the following functions ...

 

TRACE MODE SCADA/HMI Controls Ventilation in a Riga Commercial and Office Center

TRACE MODE SCADA/HMI in climate control of the shoping center RD Holding, Riga, LatviaA Riga city based Sia Rameda company (Riga , Latvia) has used russian made TRACE MODE SCADA/HMI software to develop a control system for ventilation, heating and cooling equipment in the RD Holding commercial and office center in Riga (street Maskavas 240, Riga , Latvia).

The main purpose of the work is to connect all ventilation machines, chillers and heating units to a centralized computer, supervisory control system to ensure round the clock equipment monitoring from a single center.

The Sia Rameda engineers have replaced an old ....

SCADA TRACE MODE In Process Control of The Biggest European Oil Shale Chemical Company

VKG OIL

Viru RMT Ou (Estonia, EU), Authorized System Integrator of AdAstrA Research Group fulfilled reconstruction of control system for the 1000 tones gas generator retort at the main technological process of VKG oil shale company.

VKG Oil is the biggest oil shale chemical industry in Europe, the main field of activity of which is thermal processing of oil shale. 1.4 million tons oil shale is reprocessed per year. The company produces various fuel oils, which are characterized by low viscosity and a setting point below -25ºC, oil coke and pitch, summary oil shale phenols, antiseptic wood impregnation oil and bitumen.

The return of investment in reconstruction of SCADA TRACE MODE based gas generator control system was achieved within...

Intel Chooses TRACE MODE SCADA/HMI for Office Building Automation

SCADA TRACE MODE in Intel Office AutomationProtect Company deploys a TRACE MODE 6 SCADA/HMI based building management system across Intel's new office building.

Covering all of Intel's high-tech office, this advanced automation system is in charge of the main and redundant power supply, uninterruptible power supply, sewerage, leakage control, fire retarding valves and smoke removal, climate.

The dispatcher control system builds upon hardware from Advantech, Sauter and S+S Regeltechnik, Jola, York, SAT 4TM power meters, and Schneider Electric frequency converters.

SCADA TRACE MODE 6 in Control System of European Nuclear Power Plants

TRACE MODE SCADA/HMI at atomic power-plant Bogunice

A Moscow-based SNIIP-SISTEMATOM company has set up an automated system to control the neutron current in the reactors of the 3rd and 4th power units at Bogunitse nuclear power plant (Slovakia). The new control system has been developed using Russian made SCADA/HMI software TRACE MODE 6.

A similar control system has been also developed for Mokhovtse nuclear power plant (Slovakia). 

SCADA HMI TRACE MODE 6 in PARK HOUSE Mall Automation

Nationwide retail group PARK HOUSE has selected SCADA HMI TRACE MODE 6 for use in their building automation systems.

EngineerMarket company (Samara City) has commissioned the control systems of two PARK HOUSE malls in Yekaterinburg and Tolyatti Cities.

LAST NEWS

Teknofeed Uses TRACE MODE HMI in Fodder Additives Plant Batching Control

A Belgorod based AIT company (South of Russia) has successfully used TRACE MODE SCADA/HMI software to develop and to implement a batch control system for manufacturing of fodder additives. The control system has been installed in facility of TeknoFeed (Tshebekino, Belgorod area, Russia).

The main task of the TeknoFeed control system consists in the most precise batch dosing of fodder additives. The control system maximizes batch dosing accuracy of loose and liquid components (acids) according recipes. 

The TeknoFeed batch control system includes ...

The Brodsky Refinery (Bosnia) Implements TRACE MODE SCADA/HMI for EURO 5 Gasoline Production

Brod Refinery automated with TRACE MODE SCADA/HMIIn Bosnia, the Bosanski Brod refinery launched a second production line, which was repaired by the Russian company Zarubezhneft. Now the plant is able to produce the gasoline conforming to the Euro 5 standard.

The operator control systems for the gasoline production at the Bosanski Brod refinery were developped and implemented by several Russian system integrators. All integrators used Russian SCADA-software TRACE MODE 6 (AdAstra Research Group, Moscow) for process control of gasoline production.

New Brodsky refinery control system consists of the following parts ...

TRACE MODE 6 SCADA/HMI In Control Of City Water Supply Utilities

The Iron–Technik company (Ust -Kamenogorsk, Kazakhstan), an AdAstra authorized system integrator, has launched into commercial operation an automation system for municipal public utility named "Oskemen" (Ust -Kamenogorsk, Kazakhstan ).

The new control system is build with TRACE MODE SCADA/HMI software and embraces 14 plants of the "Oskemen water utility" enterprise, e.g...

Pakistan Students Study Industrial Automation Technologies with SCADA TRACE MODE

A new laboratory practice on Supervisory control and Data Acquisition (SCADA) and Human Machine Interface (HMI) system development is launched for undergraduate students of Electrical Engineering at University of Engineering and Technology, Taxila (Punjab, Pakistan). University of Engineering and Technology, Taxila commonly referred to as UET Taxila is among the best engineering universities in Pakistan. The new practice is based on the TRACE MODE SCADA/HMI software.

The laboratory work was developed by  Director Technical, Creative Electronics & Automation in his MSc Research work under the supervision of Prof. Dr. Muhammad Ahmad Choudhry using the Omron's latest CJ1 Programmable Logic Controller (PLC), the Device-Net field bus and the latest version of TRACE MODE 6 SCADA/HMI software.

The author can share the experiments the files of SCADA as well as PLC and complete Experimentation & Training documentation. Please contact ...

TRACE MODE SCADA/HMI Controls Peat Product Production in Poland

peat production TRACE MODEThe Elblag city based Test company (Poland) launched a process control system for the production line of peat products at the „Rucianka” factory belonging to Hollas Sp. z o.o. company - the Poland's biggest peat products manufacturer.  

The new control system was developed using TRACE MODE software and Advantech ADAM IO modules. It has been implemented in FBD programming language, it includes...

TRACE MODE SCADA Employed in Automated Control System for 2nd Power Unit at Krasnodar Heat and Power Plant

The Krasnodar heat and power plant launched an automated control system for the 2nd power unit that was developed using SCADA TRACE MODE system and the RK-131/300M controllers.

Within the shortest time-frame, a team of four engineers from Yuzhniy Engineering Power Center, YugOGRES, successfully deployed the control system during overhaul at the 2nd power unit.

SCADA HMI TRACE MODE 6

Current TRACE MODE release 6.10.2. Upgrade now for free!



NEWS