Sign In >>


PARTNERS

SCADA HMI SOFTLOGIC MES EAM HRM

TRACE MODE SCADA/HMI Controls Ventilation in a Riga Commercial and Office Center

TRACE MODE SCADA/HMI in climate control of the shoping center RD Holding, Riga, Latvia

A Riga city based Sia Rameda company (Riga , Latvia) has finished a new phase of implementation of a control system for ventilation, heating and cooling equipment in the RD Holding commercial and office center in Riga (street Maskavas 240, Riga , Latvia).

The RD Holding commercial and office center is situated close to the center of Riga and has a good infrastructure. It contains the offices of many renowned Latvian industrial, transportation , telecommunications companies and banks, a fitness center, and a range of shops, including RD Electronics, the largest electronics chain store in Latvia. .

The Sia Rameda engineers have used TRACE MODE SCADA/HMI software (AdAstrA , Moscow, Russia) for the development of a supervisory system for automatic climate control of the building (ventilation, cooling and heating) . The main purpose of the work is to connect all ventilation machines, chillers and heating units to a centralized computer, supervisory control system to ensure round the clock equipment monitoring from a single center.

The Sia Rameda engineers have replaced an old heating controllers with brand new DANFOSS - Danfoss ECL210/310 ones. The obsolete controllers of ventilation machines have been also dismantled and substituted with modern Swedish controllers REGIN CORRIGO. Additional temperature sensors and ICP DAS IO modules have been installed too. The result is the ability to control the operation of all ventilation machines, chillers and heating units from a central server with the TRACE MODE HMI.

The real time data on the operation of the ventilation, cooling and heating systems are being acquired and stored in TRACE MODE historical archives (SIAD database). An alarming module is also set providing automatic alarm messaging to the authorized staff mobile phones and e-mails in case of emergency.

The automation ventilation, heating and cooling control system of the RD HOLDING commercial and office center has been developed gradually in the way of planned modernization. The development of information system and replacement of equipment occurred step by step, with minimal impact on to daily operations of the commercial and office center. The automation system is still evolving.

For example, in 2013, 3 more ventilation machines, glycol unit pumps and a chiller were connected to the central supervisory automation system. In the near future developers plan to connect to the new system a gas 500 kW boiler and 5 additional ventilation machines.

The tool used - TRACE MODE SCADA/HMI supports the system upsizing, which is convenient for both the automation system developer and customer.

In 2013, the Sia Rameda company ( Riga , Latvia) has reached a new level - received the status of AdAstra authorized dealer and it is from now on an official Adastra Research Group, Ltd representative in the Republic of Latvia.

TOP NEWS

DPTA Corp is TRACE MODE SCADA/HMI Software Dealer In Ho Chi Minh City (Viet Nam)

DPTA TRACE MODE SCADAThe Ho Chi Minh City based (Viet NamDuc Phong Technology and Automation Corporation (DPTA) has the status of AdAstrA Authorized Dealer. The corporatin has the experience and qualifications to sales and customer support for TRACE MODE SCADA/HMI software.

Viet Nam FlagTECHNOLOGY CORPORATION AND GERMAN STYLE AUTO was established in 2006, with a team of professionals, engineers, management staff are formally trained, motivated and experienced customers always trust.

AdAstrA Beijing Representative Now Open

AdAstrA Representative for ChinaOn 24 April, 2006 AdAstrA Research Group has opened the Beijing Representative office. The office will focus on technical support for Chinese users of TRACE MODE SCADA software and will co-ordinate building of the Chinese national network of system integrators and dealers. Special attention will be given to the close OEM co-operation with Chinese instrumentation companies. 

The Chief AdAstrA Representative for China is nominated Mr. Meng Zhen Yu

800 MWt Power Unit at Talimardjan Power Plant Launched under TRACE MODE SCADA/HMI Control

ZAO PIK ZEBRA (Moscow, Russia) the AdAstrA's system partner has completed development and successfully implemented control system for the power unit 1 (800 MWt) at Talimardjan heat power plant (Uzbekistan). The control system is based on KRUIZ DCS and SOFTLOGIC and HMI software TRACE MODE.

TRACE MODE HMI for Building Material Production in Uzbekistan

PROIZCOMPAVTO (Fergana, Uzbekistan), AdAstra's authorized  system integrator, has been successfully implementing TRACE MODE SCADA/HMI & SOFTLOGIC-system  in process control systems at Uzbekistan enterprises producing cement, roofing slate, glass, glassware for more than 5 years.

PROIZCOMPAVTO's solutions are known for their economic efficiency (about $150 per a single input/output), effectiveness and  high reliability, which has been verified by many well-known Uzbekistan industrial enterprises. 

The Biggest Chinese Metal Plant Chose TRACE MODE SCADA/HMI

Baoshan Iron & Steel Plant is the biggest metal plant in China. In January 2004, a SCADA/HMI and softlogic process control system for air and oil supply to the rolling mill was successfully launched in the steel-rolling shop of Plant No. 3. The system has been developed by engineers of Silian Corporation, the biggest state instrument-making Chinese corporation.

The process control system has been made in the  SoftDCS architecture. It is based on FCS-2000 redundant PC-based controllers under control of Micro TRACE MODE softlogic software, remote I/O cards and TRACE MODE SCADA/HMI.  According to an OEM-agreement signed with AdAstra, Silian supplies the  FCS-2000 controller with TRACE MODE SCADA/HMI and softlogic software.  

Advantech Chooses TRACE MODE To Control Its Own Office Building

Advantech  Corporation (Taiwan) has presented the Advantech eBuilding Automation System, the control system for its own office building in Beijing  based on the Russian  SCADA & Softlogic system TRACE MODE (AdAstrA Research Group, Ltd, Moscow) and PC-based PLC ADAM 5510/HC (Advantech, Taiwan).

The Advantech Smart Building includes security, access control, climate (HVAC) and power utilities control.  The system has been developed according to the most advanced SoftDCS technology and based on PC-based PLC - ADAM 5510/HC controllers with Micro TRACE MODE , Ethernet network and Web-applications.

Naturally, that as software tool the developers prefered  TRACE MODE - a world leader in the SoftDCS technologies.

LAST NEWS

TRACE MODE SCADA/HMI In Control of The Biogas Fuel Production Plant in Poland

The Test company (Poland) used the TRACE MODE SCADA/HMI software to build the control system for the plant of biogas fuel production from the sewerage - Elbląskie Przedsiębiorstwo Wodociągów i Kanalizacji w Elblągu Sp. z o.o., situated in Elblag city in north-eastern Poland.

The Elblag city is a Polish leader in energy production from renewable sources, including biogas and biomass.

According to the developers of biofuel production systems, the use of SCADA TRACE MODE has reduced the overall cost of the project in two-three times (compared to the same level SCADA software). 

The system monitors the following values ...

TRACE MODE SCADA/HMI in Control of The Kazakhstan's Largest Atyrau Oil Refinery

The Complex Information Systems Co. (Kazakhstan) together with Namip Industrial Solutions Co.(Russia) have finished the first stage of manufacturing control system for one of the Kazakhstan's largest plant Atyrau Oil Refinery.

This control system is built with TRACE MODE SCADA\HMI and Oracle software.

The new oil refinery control system consists of ...

New TRACE MODE SCADA/HMI Software Dealer In Poland

TRACE MODE SCADA/HMI dealer in PolandAdAstra Research Group, Ltd signed a new partnership agreement for TRACE MODE SCADA/HMI distribution in Europe.

In September 2009 Polish company TEST Stanislaw Gojlik was awarded with Authorized dealer status and became the first TRACE MODE SCADA/HMI software supplier to the growing Polish market of industrial automation.

TRACE MODE HMI for Gas-turbine Power Plants

Elna Company, the AdAstra's authorized  system integrator, has developed a new serial project: the process control system for low-capacity gas-turbine power plants up to 12 MW.

The developers believe that the implementation of such system will provide a tremendous economic effect: in Russia such system allows to reduce the cost of electricity in 1000 times.

The gas-turbine power plant  process control system has been developed on the PC-based PLC ELPK,  manufactured by Elna and the integrated SCADA/HMI & Softlogic system TRACE MODE 5, by AdAstra Research Group.

SCADA/HMI TRACE MODE in The Chinese Sugar Industry

The Silian corporation, one of the main AdAstrA's OEM-partners in China, has completed the development of DCS-system at the Yong Xin Sugar factory in the Guang Xi province (China).

The Yong Xin  factory is the biggest sugar factory in the South-western part of China, where great part of South-East Asia sugar cane is planted. The TRACE MODE based project is designed to control the process of feeding raw materials, water and other components, to provide HMI features, to collect data, to issue emergency alarms and display the process history on trends.

SCADA HMI TRACE MODE 6

Current TRACE MODE release 6.10.2. Upgrade now for free!



NEWS